Description
By popular demand, the Armored Cap (or armoured for us Brits!) is upon us. This upgrade to your dry herb vaping experience contains a Captive Cap encased in a stainless steel shell. Designed with torch users in mind the armored cap shines when heated slowly (without the need to spin) and is capable of full extractions in 1-2 heat cycles. The original geometry of the cap has been kept by machining grooves to locate your captivations and utilize the digger outer when needed. This product has a matte grey finish on stainless steel that will patina through usage. The additional mass in the cap allows for slower, longer, and more thorough extractions whether you’re on the couch or on the go. Unlike previous versions of the cap the Armored cap is preadjusted for fitment and designed to be a tighter fit on the tip to prevent the hot cap from falling off accidentally. The Armored Cap may have gotten bigger, but the branding gets smaller. The machined captivations and logo placement can be used as a visual reference on device heating. The Armored Cap will fit in any DynaVap stash when assembled onto a device. Features: Higher mass for longer and further extraction Standard captivations Machined heating references Induction Heater compatibility varies due to the increased diameter of the cap (12mm). When used with an induction heater it may require multiple heat cycles to achieve the same results as a torch. Does work with The Wand (no adaptor). The Armored Cap retains heat for an extended period of time and has therefore been designed with a tighter fit on your VapCap tip to reduce the likelihood that it will fall off during use. As a result, the Armored Cap may scratch certain titanium and PVD colored tips and caution should be used in the placement and removal of the Armored Cap from your device. Scratches are normal and do not affect the performance of our tips or present a health risk.
