Description
The Aspire Breeze / Breeze 2 Replacement Coils are a 0.6 Ohms SS316L for the Breeze and the Breeze 2, and a 1.0 Ohms for the Breeze 2, supplied in a pack of 5 . Both the Breeze and the Breeze 2 have an output range of 9-25W and no wattage settings to adjust. Choose the coil to suit your Breeze and your e-liquid. Aspire’s Coil Pairings Your Breeze E-liquid Aspire’s coil Breeze Normal e-liquid 0.6 Ohms Breeze Nicotine salts or a high nicotine strength 1.2 Ohms Breeze 2 Normal e-liquid 0.6 Ohms Breeze 2 Nicotine salts 1.0 Ohms Either Breeze Kit The 0.6 Ohms is compatible with both the original Breeze and the Breeze 2, and it is recommended for use with both. The 1.0 Ohms is compatible with the original Breeze as well. Aspire recommends it for the Breeze 2. Please note: these are not the coils for a Breeze NXT. The Breeze NXT coils are made specifically for the Breeze NXT and are not compatible with the Breeze or the Breeze 2. Changing a Breeze 2 Coil To replace the coil on a Breeze 2, remove the drip tip, then unscrew and pull out the chimney unit. The coil sits on the airflow control ring, so lift the old one out and replace it with the new coil before screwing the chimney unit back into the pod. With the drip tip off, you can rotate that same ring to adjust the airflow and fine-tune how tight or open the draw feels. Why is the 0.6 Ohms paired with normal e-liquid? Using nicotine salts on the 0.6 Ohms coil or normal e-liquid on the 1.2 Ohms means the performance may not be satisfactory. Each coil is at its best with the e-liquid it is recommended for.
