Description
Vaporesso Luxe X Pro Pod Vape Kit The Vaporesso Luxe X Pro is a 40W refillable pod kit with adjustable wattage, a 0.42-inch OLED screen, and adjustable airflow for MTL and restricted DTL vaping. It runs a 1500mAh built-in battery and is powered by the AXON chipset with Smart mode, which automatically sets the wattage to match your installed pod. Two Luxe X mesh pods are included: a 0.4 ohm for DTL/RDL and a 0.6 ohm for RDL, both with 2ml capacity and built-in coils. The Luxe X Pro also accepts all other Luxe X pods and Luxe XR empty pods with replaceable GTX coils , giving you a wide range of vaping styles from a single device. Available in seven colours with a zinc alloy chassis. Luxe X Pro Key Features 1500mAh built-in battery with USB-C charging 5 to 40W adjustable output with AXON chipset 0.42-inch OLED screen with wattage and battery display Draw-activated and button-activated firing Adjustable airflow from MTL to RDTL Compatible with all Luxe X pods and Luxe XR pods with GTX coils 2ml bottom-fill pods with SSS leak-resistant technology Seven colours Compact zinc alloy build at 99.1 x 32 x 23.4mm 1500mAh Built-In Battery with USB-C Charging The Luxe X Pro runs a 1500mAh built-in battery, which provides a full day of moderate use for most vapers. At lower wattages with the 0.6 or 0.8 ohm MTL pods, it will last longer. At higher wattages with the 0.4 ohm pod, heavier vapers may need to top up the charge during the day. The USB-C port is on the base of the device and charges at 5V/1.5A. A Type-C cable is included in the box. The device measures 99.1 x 32 x 23.4mm, making it compact enough to fit in a trouser pocket or small bag without any bulk. 5 to 40W Adjustable Output with AXON Chipset Unlike simpler pod kits that set the wattage automatically, the Luxe X Pro lets you adjust power output from 5W to 40W using the plus and minus buttons below the screen. This means you can fine-tune the warmth, vapour production, and throat hit to match your preferences with any compatible pod. Smart mode is also available, which reads the installed pod resistance and sets the wattage to a recommended level. Five clicks of the fire button turns the device on or off. The AXON chipset includes standard safety protections. 0.42-Inch OLED Screen with Wattage and Battery Display The 0.42-inch OLED screen sits on the front of the device and shows the current wattage, battery level, and installed coil resistance. This is a significant upgrade over the original Luxe X and the Luxe X2, which use LED battery indicators with no wattage display. Having a screen means you can see exactly what power you are running at and make informed adjustments. The screen is small but clear, and all the essential information is visible at a glance during use. Draw-Activated and Button-Activated Firing The Luxe X Pro supports both firing modes. Draw activation means you simply inhale on the mouthpiece to produce vapour, which suits vapers who want a natural, cigarette-like action. Button activation uses the fire button on the front panel and gives more control over when the coil heats. Both modes are always available without needing to switch a setting. The auto-draw sensor responds quickly, even when used in RDL mode with a faster inhale. Adjustable Airflow from MTL to RDTL The airflow adjuster is a sliding switch on the side of the Luxe X Pro. Slide it towards closed for a tighter MTL draw, or open it up for a looser restricted DTL pull with more vapour. The adjustment range covers everything from a cigarette-style draw to a relaxed RDL inhale, depending on the pod resistance you have installed. This is one of the main features that separates the Luxe X Pro from the original Luxe X, which had more limited airflow options. Compatible with All Luxe X Pods and Luxe XR Pods with GTX Coils The Luxe X Pro uses the same magnetic pod connection as every device in the Luxe X family. It works with all Luxe X built-in coil pods (0.3, 0.4, 0.6, and 0.8 ohm, including the newer COREX 2.0 versions) and also accepts Luxe XR empty pods, which use replaceable GTX coils from 0.4 to 1.2 ohm. The built-in coil pods are simpler to maintain because you swap the whole pod when the coil is finished. The Luxe XR pods with GTX coils are more flexible because you only replace the coil, not the pod itself. With a maximum output of 40W, the lower resistance GTX coils (0.15 and 0.3 ohm) are not practical on this device. The Luxe X Pro is not compatible with XROS pods, which are a separate platform. 2ml Bottom-Fill Pods with SSS Leak-Resistant Technology The two included pods each hold 2ml of e-liquid and fill from the bottom through a silicone stopper. Pull the stopper out, fill to just below the top of the port, and press the stopper back in. Vaporesso’s SSS (Seal, Saturate, Store) leak-resistant technology is built into the pod design to prevent leaking during filling and everyday use. The pods are made from transparent PCTG plastic, so you can check your e-liquid level at a glance. Before your first vape on a new pod, fill it and leave it to soak for around five minutes. Seven Colours The Luxe X Pro is available in seven colours. The chassis is zinc alloy with a solid, opaque body that does not show the internal circuit, unlike some other Luxe X devices with transparent panels. The finish is smooth and resists fingerprints well. Colour options range from neutral tones to bold choices, including Pink for the “pink vaporesso” and “pink vaperesso” search terms, and Dazzling Yellow for a standout look. Compact Zinc Alloy Build The Luxe X Pro measures 99.1mm tall, 32mm wide, and 23.4mm deep. It sits comfortably in the hand and is small enough for everyday pocket carry. The zinc alloy chassis gives it a solid, premium feel without being heavy. The fire button on the front has a satisfying click, and the plus and minus buttons below the screen are easy to reach with one hand. The pod sits flush with the top of the device and is held securely by four magnets.
