Description
🎯 BEST DEAL — £7.99 — 3-PACK, SAVE £2.00! Elf Bar ELFX 2.0 Replacement Pods The Elf Bar ELFX 2.0 Replacement Pods are the second-generation refillable pods for the whole ELFX range, sold as a pack of 3 for £7.99 in 0.6Ω or 0.8Ω . Each pod holds 2ml , arrives empty, and runs a QUAQ DURA vertical dual mesh coil instead of the original pods’ parallel mesh. Elf Bar rebuilt the chimney, coil and seals, and these Elf Bar ELFX pods fit the original ELFX, Pro, Mini and Ultra, plus the new Elf Bar ELFX 2 Pod Kit. They suit anyone on nic salts or 50/50 e-liquid who wants stronger flavour and fewer pocket leaks without buying new hardware. 🔥 Real-World Pod Life: Independent UK testing and owner reports put pod lifespan at seven to fourteen days for an average vaper, with most landing around 10 days before flavour fades. A 3-pack therefore covers roughly a month , making the effective running cost about £2 per week plus e-liquid. Key Facts Elf Bar ELFX 2.0 Replacement Pods are sold in packs of three and arrive empty. An ELFX 2.0 pod holds 2ml of e-liquid , the UK legal maximum. Two resistances are made for the range: 0.6Ω and 0.8Ω . At 0.8Ω, an Elf Bar ELFX pod is rated to 17W and gives a mouth-to-lung draw. At 0.6Ω, the rating rises to 25W for a restricted direct-to-lung draw. Compatibility covers the Elf Bar ELFX, ELFX Pro, ELFX Mini, ELFX Ultra, ELFX Special Edition and ELFX 2. The Elf Bar ELFX Mega uses a larger pod and will not take an ELFX 2.0 pod. Nic salts and 50/50 e-liquid suit an ELFX 2.0 pod; high-VG shortfill does not. Key Specs Customers Check 📦 Pack Size: 3 Empty Pods Roughly a month of vaping for most users. Each pod is a sealed unit with the coil built in — when the coil goes, the whole pod is replaced. 💧 Capacity: 2ml Per Pod The UK legal maximum; a fill lasts a day or two of moderate use. Top-fill under a silicone bung, so the pod stays on the device while you refill. ⚡ Resistance: 0.6Ω or 0.8Ω 0.8Ω gives a tight mouth-to-lung draw rated to 17W . 0.6Ω gives a looser, warmer restricted direct-lung draw rated to 25W . 🔥 QUAQ DURA Vertical Dual Mesh Two mesh layers arranged vertically, built from FeCrAl alloy. The alternating mesh cycle spreads wear, which is why Elf Bar rates pod life at up to three times a standard single-mesh pod. 🔒 Five-Layer 5A Leakproof System One more seal layer than the original pod’s four. Combined with the anti-condensation V-shaped reflux channel , condensate is sent back into the pod rather than onto the contacts. 🔐 Twin Silicone Plugs (Child Lock) Two fill-port plugs instead of one. The inner plug seals even if the outer cap is opened — this is the source of the child-lock feature and most of the leak improvement. 📏 36.9mm Tall Fractionally taller than the original pod at 35.1mm. The extra millimetre houses the wider chimney and the fifth seal layer. It still clicks into every ELFX device. 🧪 Best E-Liquid: 50/50 or Lower VG Nic salts and 50VG/50PG work best. Above 50% VG, the liquid wicks too slowly through a pod coil and burns it early. High-VG shortfills belong in a sub-ohm tank. 🇬🇧 TPD Compliant, MHRA Notified 2ml capacity and fully UK TPD compliant. Genuine Elf Bar stock sourced through authorised UK distribution, never grey-market. Strictly 18+. Elf Bar ELFX 2.0 Pod Specifications Specification Detail Pack Size 3 pods, one resistance per pack Pod Capacity 2ml (UK TPD) Resistances 0.6Ω (max 25W) or 0.8Ω (max 17W) Coil QUAQ DURA vertical dual mesh, FeCrAl alloy Fill Method Top fill under a silicone bung (twin plugs, child lock) Leak Protection Five-layer 5A system + V-shaped reflux channel Pod Height 36.9mm (original pod: 35.1mm) Vaping Style 0.8Ω MTL / 0.6Ω RDTL Recommended E-Liquid 50/50 or nic salts (50% VG or lower) Compatible Devices ELFX, ELFX 2, ELFX Pro, ELFX Mini, ELFX Ultra, ELFX Special Edition Not Compatible With Elf Bar ELFX Mega (uses a larger pod) Compliance UK TPD compliant, MHRA notified Price £7.99 per 3-pack (£2.66 per pod) Key Features Up to 35% more flavour: Elf Bar’s own figure for the new wider chimney and vertical coil layout. The larger heating surface vaporises more e-liquid per puff, which is what drives the flavour gain. Fits five ELFX devices: ELFX, ELFX Pro Classic Edition, ELFX Mini, ELFX Ultra and ELFX 2. Old and new pods swap both ways freely. Does not fit the ELFX Mega: that kit takes a larger pod, sold as the Elf Bar ELFX Mega Replacement Pods . Widened bottom electrode: better conductivity for a more stable power output, which shows up as less fluctuation in flavour from puff to puff. Prime before the first draw: leave a fresh pod standing 5 to 10 minutes; skipping this is the biggest cause of an early burnt pod. Top-fill design: lift the silicone bung on the top edge and fill down the side channel. No need to remove the pod from the device. 0.6Ω or 0.8Ω: Which Elf Bar ELFX Pod to Buy 0.8Ω (MTL) — the everyday choice. Tighter draw, cooler vapour, less liquid per day and the longer-lasting of the two. Pairs with 10mg or 20mg salts and Eco mode on the ELFX 2. Rated to 17W. 0.6Ω (RDTL) — warmer and airier. Denser vapour with more flavour punch. Best with 5mg to 10mg salts or 50/50 in Normal or Power mode. Rated to 25W , and it drinks liquid faster. Ex-smokers and former disposable users should start on 0.8Ω ; it mimics a cigarette draw and keeps 20mg salts smooth. Fruit and ice fans wanting cloud should settle on 0.6Ω. Neither pod unlocks the ELFX 2’s full 30W; that needs the separate 0.4Ω pod. 💡 Pro Tip — Which Resistance First? If you’re unsure, buy the 0.8Ω pack. It’s the tighter, more cigarette-like draw, uses less liquid, and lasts longer per pod. Once you know your preference, switch to 0.6Ω if you want more vapour or stick with 0.8Ω for all-day MTL. A pack cannot be mixed, so buy one of each if you want to try both. How Long Will an Elf Bar ELFX Pod Last 🪶 Light Vaper (A Few Sessions a Day) Two to three weeks per pod. A 3-pack covers about two months. Best for vapers who only reach for the device a handful of ti
